Links to general pages on this site:
Home Page |
Orders | Notice Board
| American Civil War Naval, Scale 1:1200 This scale is just perfect for large scale fleet actions, with lots of room for manoeuvring. The models are of an extremely high standard. The following excerpt from a Miniature Wargames review says it all: The detail on these models is quite exceptional, in particular the rendering of the wooden planking and paddlewheels - the best so far in the scale. Some kits
contain masts and sails where appropriate.
NEW
- BRASS PHOTO-ETCH SHROUDS/RATLINES |
Click on the following links to 'jump' to these 1:1200 ACW related
headings.
Gun Emplacements |
Fortifications | Flags |
Hulks | 1200 Illustrations
* This red symbol indicates hull is now resin cast or part resin.
Ref |
Model |
Type |
Price £ |
ACW1 |
CSS Virginia/Merrimac |
Ironclad |
5.00 |
ACW2 * |
USS Cumberland |
Sloop |
8.00 |
ACW3 |
USS Monitor |
Ironclad |
3.50 |
ACW4 * |
River Transport |
Sidewheel Steamer |
7.00 |
ACW5 * |
Union Ellet Ram |
Sidewheeler |
7.00 |
ACW6 * |
CSS Cottonclad |
Sidewheel Steamer |
7.00 |
ACW7 |
USS Sassacus |
Sidewheel Steamer |
8.00 |
ACW8 |
USS Miantonomoh |
Ironclad Monitor |
7.00 |
ACW9 |
CSS Richmond Class* |
Ironclad |
4.50 |
ACW9(a) |
CSS Palmetto State |
Ironclad |
4.50 |
ACW10* |
Union Tinclad |
Sidewheel Gunboat |
7.00 |
ACW11 * |
USS Cairo (resin) |
Ironclad |
6.00 |
ACW12 |
Sidewheel Tug |
- |
3.25 |
ACW13 |
Screw Tug |
- |
3.25 |
ACW14 * |
USS Roanoke |
Steam Frigate |
9.00 |
ACW15 |
CSS Albemarle |
Ironclad |
4.50 |
ACW16 * |
USS Benton |
Ironclad |
6.50 |
ACW17 * |
USS St Lawrence |
Frigate |
8.00 |
ACW18 * |
USS Minnesota |
Steam Frigate |
9.00 |
ACW19 |
CSS Tennessee |
Casemate Ironclad |
6.00 |
ACW20 |
Stern Wheeler |
9.00 | |
ACW21 |
General Price |
Gunboat |
8.00 |
ACW22 |
USS Hartford |
Steam Screw Sloop |
11.00 |
ACW23 |
Confederate Sidewheel Gunboat |
10.50 | |
ACW24 |
CSS Rattlesnake |
Blockade Runner |
9.00 |
ACW25 |
Commercial Steamer |
10.00 | |
ACW26 |
USS Passaic |
Monitor |
6.00 |
ACW27 |
USS Canonicus |
Monitor |
6.50 |
ACW28 |
USS Milwaukee |
Monitor |
7.50 |
ACW29 |
USS Onondaga |
Monitor |
7.00 |
ACW30 |
CSS Memphis |
Floating Battery |
7.50 |
ACW31 |
CSS Arkansas |
Casemate Ironclad |
6.00 |
ACW32 |
CSS Fredericksburg |
Ironclad |
6.00 |
ACW33 |
CSS Virginia II |
Ironclad |
6.00 |
ACW34 * |
90 Day Gunboat |
Gunboat |
6.00 |
ACW35 |
USS Roanoke |
Monitor |
7.00 |
ACW36 * |
USS Choctaw |
River Ironclad |
7.50 |
ACW37* |
CSS Little Rebel |
Gunboat |
6.00 |
ACW38 |
CSS Alabama |
Bark Rigged Sloop |
8.00 |
ACW40 |
USS Kearsarge |
Bark Rigged Sloop |
8.00 |
ACW42 * |
USS New Ironsides |
Broadside Ironclad |
8.00 |
ACW43 * |
USS Lafayette |
Ironclad |
7.50 |
ACW44 |
Floating Battery (covered) |
4.75 | |
ACW45 |
Floating Battery (open) |
3.25 | |
ACW46 |
Mortar Rafts x2 |
2.75 | |
ACW47 |
Mortar Schooner (with pole masts) |
5.75 | |
ACW48 |
'Fall of Shot' Markers x 8 |
2.25 | |
ACW49 * |
Army Converted Tinclad |
7.00 | |
ACW50 * |
USS Essex |
Casemate Ironclad |
5.50 |
ACW51 * |
USS Tyler (also Conestoga) |
Timberclad | 6.50 |
ACW52 * |
USS Lexington |
Timberclad |
6.50 |
ACW53 |
CSS/USS General Bragg |
Gunboat | 9.50 |
ACW54 |
USS Keokuk |
Ironclad | 4.50 |
ACW55 * |
CSS Colonel Lamb |
Blockade Runner | 7.50 |
ACW56 |
USS Indianola |
Casemate Ironclad | 9.00 |
ACW57 |
USS Armed Ferryboat |
10.50 | |
ACW58 |
CSS Manassas |
Ironclad Ram | 3.50 |
ACW59 |
CSS Gaines/Morgan |
Gunboat | 10.50 |
ACW60 * |
USS Mississippi |
Sidewheel Steam Frigate | 11.00 |
* The model, ref ACW9, is the actual Richmond Class (previously
described as Palmetto State).
There were 6 in the Richmond Class, the Palmetto State being one of them.
Further research
has shown that the Palmetto State itself had more distinctive features
than the rest of the class
and so we have made this specific model as well, ref: ACW9(a).
Gun Emplacements
Available in resin, or as individual sections, in metal.
Resin: cast with guns, powder store and miscellanea |
||
GE1 |
8 gun position 'convex' (approx 140x60mm) |
£5.25 |
GE2 |
6 gun position 'concave' (approx 140x60mm) |
£5.25 |
Metal: sections and end pieces that can be made up to conform to any defence line. Each kit contains the appropriate number of guns. |
||
GE7 |
4 gun position + powder store' (approx 40x45mm) |
£4.75 |
GE8 |
2 gun position triangular shape (approx 50x40mm) |
£3.75 |
GE9 |
1 gun position, triangular shape (approx 50x40mm) |
£3.75 |
GE10 |
Pair of end sections |
£2.75 |
|
GE1: Resin 8 gun position. |
Ref: ACWM1 - Resin Fort - modelled on Fort Pulaski |
£7.50 |
Ref: ACWM2 - Pk of guns (8 plus in pack) - suitable for fort. |
£2.50 |
The Fort Pulaski fortification was built on Cockspur Island at the mouth of the Savannah River in 1829. It was the first military assignment for a young second lieutenant fresh from West Point - Robert E. Lee. The fort stood 25ft above the water and had two tiers of guns, one in casements and the other above 'en barbette'. Our 1:1200 scale model is a one piece resin casting, suitable for
any number of scenarios for the American Civil War period, both land and
naval. Packs of guns are available separately. |
|
Flags
Individual packs or full sheet:
FL1 |
Confederate 1st National (pk of 4) |
80p |
FL2 |
Confederate 2nd National (pk of 4) |
80p |
FL3 |
Union National 1861-65 (pk of 4) |
80p |
FL4 |
Full sheet (16 flags): FL1, FL2 and FL3 x 2pks |
£2.50 |
Sea Bases
The following list of bases from other ranges, will fit the ACW hulls.
Bases are Resin unless stated otherwise.
| Vessel Ref. | Base size (mm) | Order Ref. | Price £ |
| ACW1 | 85mm x 40mm | MX17 | 2.00 |
| ACW2 | 65mm x 40mm | MX15 | 2.00 |
| ACW3 | 65mm x 30mm | AD(S2) | 2.00 |
| ACW4 | 55mm x 22mm (metal) | RGB5 | 1.75 |
| ACW5 | 55mm x 22mm (metal) | RGB5 | 1.75 |
| ACW6 | 70mm x 22mm (metal) | RGB7 | 1.75 |
| ACW7 | 75mm x 30mm | AD(S1) | 2.00 |
| ACW8 | 75mm x 40mm | MX16 | 2.00 |
| ACW9 & 9a | 30mm x 55mm | AD(S3) | 2.00 |
| ACW10 | 55mm x 22mm (metal) | RGB5 | 1.75 |
| ACW11 | 65mm x 30mm | AD(S2) | 2.00 |
| ACW12 | 35mm x 15mm (metal) | AD(S4) | 1.25 |
| ACW13 | 35mm x 15mm (metal) | AD(S4) | 1.25 |
| ACW14 | 85mm x 40mm | MX17 | 2.00 |
| ACW15 | 50mm x 20mm (metal) | RGB4 | 1.75 |
| ACW16 | 65mm x 40mm | MX15 | 2.00 |
| ACW17 | 65mm x 40mm | MX15 | 2.00 |
| ACW18 | 85mm x 40mm | MX17 | 2.00 |
| ACW19 | 75mm x 40mm) | MX16 | 2.00 |
| ACW20 | 55mm x 22mm (metal) | RGB5 | 1.75 |
| ACW21 | 55mm x 22mm (metal) | RGB5 | 1.75 |
| ACW22 | 85mm x 40mm | MX17 | 2.00 |
| ACW23 | 70mm x 22mm (metal) | RGB7 | 1.75 |
| ACW24 | 70mm x 22mm (metal) | RGB7 | 1.75 |
| ACW25 | 70mm x 22mm (metal) | RGB7 | 1.75 |
| ACW26 | 65mm x 40mm | MX15 | 2.00 |
| ACW27 | 65mm x 40mm | MX15 | 2.00 |
| ACW28 | 65mm x 40mm | MX15 | 2.00 |
| ACW29 | 75mm x 40mm | MX16 | 2.00 |
| ACW30 | 65mm x 40mm | MX15 | 2.00 |
| ACW31 | 55mm x 22mm (metal) | RGB5 | 1.75 |
| ACW32 | 60mm x 22mm (metal) | MX15 | 2.00 |
| ACW33 | 65mm x 40mm | MX15 | 2.00 |
| ACW34 | 65mm x 40mm | MX15 | 2.00 |
| ACW35 | 85mm x 40mm | MX17 | 2.00 |
| ACW36 | 85mm x 40mm | MX17 | 2.00 |
| ACW37 | 30mm x 55mm | AD(S3) | 2.00 |
| ACW38 | 75mm x 40mm | MX16 | 2.00 |
| ACW40 | 75mm x 40mm | MX16 | 2.00 |
| ACW42 | 75mm x 40mm | MX16 | 2.00 |
| ACW43 | 85mm x 40mm | MX17 | 2.00 |
| ACW49 | 60mm x 22mm (metal) | RGB6 | 1.75 |
| ACW50 | 65mm x 40mm | MX15 | 2.00 |
| ACW51 | 60mm x 22mm (metal) | RGB6 | 1.75 |
| ACW52 | 60mm x 22mm (metal) | RGB6 | 1.75 |
| ACW53 | 70mm x 22mm (metal) | RGB7 | 1.75 |
| ACW54 | 30mm x 55mm | AD(S3) | 2.00 |
| ACW55 | 85mm x 40mm | MX17 | 2.00 |
| ACW56 | 60mm x 22mm (metal) | RGB6 | 1.75 |
| ACW57 | 30mm x 55mm | AD(S3) | 2.00 |
| ACW58 | 30mm x 55mm | AD(S3) | 2.00 |
| ACW59 | 70mm x 22mm (metal) | RGB7 | 1.75 |
| ACW60 | 85mm x 40mm | MX17 | 2.00 |
ACW 1:1200
Top of Page
1200 Illustrations
General pages on this site:
Home Page |
Orders | Notice Board